HANGZHOU YEYI CO., LTD -

HANGZHOU YEYI CO., LTD

Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]

miter saw
Specification: YEYI-93051
Detail: Model No. 93051 Blade Diameter 305mm Max Cutting Capacity 90degree H102XW310mm 45degree H102XW215mm No-Loade Speed 4200r/min Rated Input Power 1800W Rated Voltage 110/220V Rated Frequency 60/50Hz N.W. 26kg G....

miter saw
Specification: YEYI - 92101
Detail: Blade Diameter :210mm Max Cutting Capacity: 90" H55*W120cm 45" H55*W70cm No load speed: 4800r/mm Rated Input Power :1050W Rated Voltage : 110/220V Rated Frequency :60/50Hz N.W./G.W :7.2kg/8kg Measurement :40....

cut-off machine
Specification: YEYI - 93555
Detail: Blade Diameter :355mm Max Cutting Capacity :115mm Mild Stand Angel: 0"-45" No load speed :3800r/mm Rated Input Power :2000W Rated Voltage : 110/220V Rated Frequency: 60/50Hz N.W./G.W :15.5kg/17kg Measurement :5...

circular saw
Specification: YEYI - 91852
Detail: Blade Diameter :185mm Max Cutting Capacity: 90" 58mm,45" 40mm Mild Stand Angel :0"-45" No load speed :5000r/mm Rated Input Power: 1300W Rated Voltage : 110/220V Rated Frequency :60/50Hz N.W./G.W: 5*4kg/6*4kg Qu...

53 pcs combination drill set
Specification: B5301
Detail: 19pcs HSS twist drill black finished (1-10)*0.5mm 8pcs masonry drill (3-10)*1.0mm 8pcs wood working drill (3-10)*1.0mm 12pcs bits 4pcs socket 1pc check key 7pcs hex shank drill 1pc counter-sink

8pcs wood-working drill set
Specification: W802
Detail: Size(mm):(3-10)*1.0mm

5 pcs masonry drills set
Specification: M502
Detail: M502-1 Zn plated M502-2 Ni plated M502-3 Cr plated Size(mm): 4,5,6,7,8

8 pcs twist drill set
Specification: H802
Detail: H802-1 black finished H802-2 edge ground H802-3 edge ground tin coated H802-4 fully ground bright H802-5 fully ground black finished H802-6 fully ground tin coated Size(mm): 3-10*1mm

masonry drills high-helix
Specification: YEYI-P50-1
Detail: MASONRY DRILLS HIGH-HELIX Standard: DIN8039

hss taper shank twist drills
Specification: YEYI-P40
Detail: Manufacturing process: Milled Material: M2,M42,M35 Point Angle: 118degree Flute: N Standard: DIN345


Showing 11 - 20 of 21, total 3 pages [First] [Previous] [Next] [Last]
1 2 3